Manner of installation isogam

1 - before installation the place must be concreted and become completely flat ‘ and around of it must become musculature.
2 - the area must be completely cleaned up and it is better to be washed with water.
3 - mix the primer with solvent and pour it on the area equally.
4 - after becoming dry after the rolls separate the cover and again make it roll.
5 - open the said of installation roll isolator and warm it with a stile torch on all of area and install the isolator.
6 - in the welding process that the edges of two isolators cover each other ’ the coverage must be warmed with torch and be welded with a trowel after installation until become assured of equality of cracks.