Distinctions
& specification
1. It’s a really
light and resistance moist insulation for roof , cold store , oil
and gases pipe and chicken farming , etc .
2. Except for main material tar , use of seven kind of chemical and
mineral material , such as , tissue , polystyre fiber .
3. It’s really lights so there wouldn’t by any additional load on
the roof .
4. When it’s snowing , it doesn’t need to clean the snow & It
doesn’t make any pollution .
5. It ‘s resistance to coldness and warmness .
6. It has simple installation .
7. It is resistance to penetration of chemical gas , u.v radiation
and acids
8. Products of this company made of the improved tar so it never
rote and it’s completely flexible .
9. This company guarantees its products for customers .
10. Iran instruction company guarantees these product for 5 years .
11. This company uses of recycled tar at all , instead of polystyre
and Tissue , of course base on all standard which are
noted before , it tries to produce it’s productions .
|
Reinforcement Non Woven Glass
Fiber (tissue) Reinforced With 50 gr Glass Yam
Saturated Reinforcement From Modified Bitumen 130 gr Polyester
(needle)
Outer Surface Mineral Powder or Polyethylene Film
Inner Surface Polyethylene Film
|
|
Result |
Unit |
|
Length |
10 |
M |
|
Width |
1 |
M |
|
Thickness |
4 +-
0/2 |
mm |
|
Mass
per Unit Area |
4/1
+- 0/2 |
Kg/m2 |
|
Water
permeability (min) |
60 |
KP |
|
Heat
Stability |
120 |
C |
|
WaterAbsorption |
Absorbed (Max) |
1 |
% |
|
Loss
(Max) |
1 |
% |
|
Resistance to UV |
Flexibility Rate (Max) |
10 |
C |
|
Loss
elongation (Max) |
10 |
% |
|
Tensile Strength at
25%
increase elongation
|
Longitudinal (min) |
40 |
Kg/5cm |
|
Transverse (min) |
30 |
Kg/5cm |
|
Tensile Strength at
Max
.Load |
Longitudinal (min) |
50 |
Kg/5cm |
|
Transverse (min) |
35 |
Kg/5cm |
|
Tearresistance
|
Longitudinal |
12 |
kgf |
|
Transverse |
10 |
Kgf |
|
|
Manner of
installation isogam
